Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / Relay and fuse / Inspection

1. CHECK FUSE

1. Remove the fuse and inspect visually.

2. If the fuse is blown out, replace the fuse.

NOTE:

If the fuse is blown again, check the system wiring harness.

Location

Main fuse box (M/B)Fuse 7.5 A (data communication module)*1(A)Fuse 30 A (audio, navigation unit)(B)Fuse 20 A (audio amplifier)(C)Fuse & relay box (F/B)Fuse 20 A (rear accessory power supply socket)(D) ...

Switches and harness

...

Other materials:

Dtc p0058 a/f / o2 heater control circuit low bank 2 sensor 2
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE T ...