Subaru Legacy BN/BS (2015-2019) Service Manual: Switches and harness

Inspection

1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness. ...

Removal

1. SATELLITE SWITCH ASSEMBLYCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Descripti ...

Other materials:

Inspection mode procedure
It is possible to diagnose the DTC by performing the indicated inspection mode.After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. INSPECTION MODE 1DTCItemNoteU0073CAN FAILURE, BUS ‘OFF’ DETECTION D ...