Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. SATELLITE SWITCH ASSEMBLY CAUTION: Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Set the tire to the straight-ahead position. 2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 3. Remove the driver’s airbag module. Driver’s Airbag Module > REMOVAL 4. Remove the steering wheel. Steering Wheel > REMOVAL 5. Remove the satellite switch assembly. Steering Wheel > DISASSEMBLY 2. TELEMATICS BUTTON The telematics button is a single unit with the overhead console or stereo camera cover assembly. For operation procedures, refer to “LIGHTING SYSTEM” section. Spot Map Light > REMOVAL |
Inspection
1. SATELLITE SWITCH ASSEMBLY1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard6 — 2VOL (+)VOL (−)SEEK ()SEEK ()LISTR ...
Other materials:
Dtc b1577 imm control module eeprom
DIAGNOSIS START CONDITION:• Battery voltage is 10 V or more.• The remote engine starter was not used to start the engine.DTC DETECTING CONDITION:• Defective body integrated unit (except for C0 and C5 models) or immobilizer CM (C0 and C5 models)• Failed to access ROM in the bo ...
