Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Check the hose for peeling, crack or clogging.

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the air intake boot.3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).4. Loosen ...

Installation
1. Install the air breather hose.NOTE:• When installing the air breather hose, pay attention to the positions of the two markings on the hose and make sure the markings come to the same position ...

Other materials:

Inspection
STEPCHECKYESNO1.CHECK SOLENOID UNIT.Measure the resistance of solenoid unit connector terminals.TerminalsNo. 4 — No. 3:Is the resistance 27.6 — 30.5 -- AT Shift Lock Solenoid and “P” Range Switch > INSPECTIONReplace the solenoid unit. AT Shift Lock Solenoid and “P” Range ...

© 2017-2026 Copyright www.sulegacy.com