Subaru Legacy BN/BS (2015-2019) Service Manual: Air breather hose

Preparation for overhaul procedure

1. Clean oil, grease, dirt and dust from the transmission.2. Using the TORX® bit T70, remove the drain plug, and drain the transmission gear oil completely.3. Tighten the drain plug using TORX® bit ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the air intake boot.3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).4. Loosen ...

Other materials:

Installation
1. PARKING BRAKE HARNESS1. Install the electronic parking brake harness.Tightening torque:Harness clamp: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the fuel tank protector.NOTE:Use a new self-locking nut (a).Tightening torque:T1: 9 N·m (0.9 kgf-m, 6.6 ft-lb) T2: 18 N·m (1.8 kgf-m, ...