Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Transfer driven gear / Inspection

1. Taper roller bearing

Replace the taper roller bearing in the following cases.

• In case of broken or rusty taper roller bearings

• In case of worn or damaged taper roller bearings

• When the taper roller bearings fail to turn smoothly or emit noise in rotation after transmission gear oil has been applied.

2. Transfer driven gear

If the tooth face of transfer driven gear and the shaft are excessively broken or damaged, replace the transfer driven gear.

Installation

1. Install the taper roller bearing (transfer case side) outer race.(A)Taper roller bearing (transfer case side) outer race2. Apply a coat of grease to the taper roller bearing (transfer case side) of ...

Disassembly

1. Using the ST, remove the taper roller bearing (extension case side).ST 498077000REMOVER(A)Taper roller bearing (extension case side)2. Using ST1 and ST2, remove the taper roller bearing (transfe ...

Other materials:

List
• List of Diagnostic Trouble Code (DTC)DTCItemContents of diagnosisReferenceU0073CAN FAILURE, BUS ‘OFF’ DETECTIONDetected when bus off status (the stereo camera detects the failure and is disconnected from CAN line) occurs. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > ...