Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Transmission case / Inspection

Check the transmission case for cracks, damage, or oil leaks.

Removal

1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL2. Remove the clutch release lever and the release bearing. Release Bearing and Lever > REMOVAL3. R ...

Installation

1. Wipe off grease, oil and dust on the mating surfaces of transmission cases with cleaning solvent.2. Install the shifter fork and rod. Shifter Fork and Rod > INSTALLATION3. Install the reverse idle ...

Other materials:

Preparation for overhaul procedure
1. After removing the engine from the vehicle body, attach the ST to the engine as shown in the figure.NOTE:When using a commercially sold engine stand, follow the instructions of engine stand used.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)ST 18232AA000ENGINE STAND2. In this section ...