Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do) / Crank sprocket / Inspection

1. Check the crank sprocket teeth for abnormal wear and scratches.

2. Make sure there is no free play between crank sprocket and key.

Removal

NOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. Remove the chain cover. Chain Cover > REMOVAL2. Remove the timing chain. Timing Chain Assembly > REM ...

Installation

1. Install the crank sprocket.NOTE:The direction of installation is not specified for the crank sprocket.2. Install the timing chain. Timing Chain Assembly > INSTALLATION3. Install the chain cover. ...

Other materials:

Disassembly
1. Disconnect the terminal M from the magnet switch assembly.2. Remove the magnet switch assembly from the starter housing assembly.3. Remove screws (A) and bolts (B) of the brush holder assembly, and remove the starter cover assembly.4. Remove the brush holder assembly from the armature assembly.NO ...