Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do) / Timing chain assembly / Inspection

1. Check the timing chain, chain guide, chain tensioner lever and chain tensioner for deformation, cracks or other damages.

2. Check the chain guide and chain tensioner lever for abnormal wear.

Removal

1. TIMING CHAIN RHNOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. Remove the chain cover. Chain Cover > REMOVAL2. Using ST and by turning the cranksh ...

Installation

1. TIMING CHAIN LHNOTE:• Be careful that the foreign matter is not into or onto the assembled component during installation.• Apply engine oil to all component parts of the timing chain.1. ...

Other materials:

Removal
1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - rear pillar UPR. Rear Quarter Trim > REMOVAL3. Remove the noise suppressor assembly.(1) Remove the connector and harness clip.(2) Remove th ...