Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Emission control (aux. Emission control devices)(h6do) / Canister / Inspection

1. Check that the canister has no deformation, cracks or other damages.

2. Check that the tube has no cracks, damage or loose part.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the rear wheel LH. Tire and Wheel > REMOVAL3. Lift up the vehicle.4. Remove the rear mud guard LH. Mud Guard > REMOVAL5. Disconn ...

Installation

1. Install the leak check valve assembly to the canister.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)2. Connect the drain tube (A).CAUTION:• Check that there is no damage or dust on the ...

Other materials:

Assembly
1. Install the CVTF filter.NOTE:• Use a new CVTF filter.• Apply CVTF to the CVTF filter.• Make sure that the CVTF filter does not protrude from the transmission case.2. Using the ST, install the oil seal.ST 18657AA000INSTALLER3. Using ST1 and ST2, install the ball bearing on the ...