Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Brake / Front disc rotor / Installation

NOTE:

Before installation, remove mud and foreign matter from the disc brake assembly.

1. Check the front disc rotor. Front Disc Rotor > INSPECTION

2. Install the disc rotor.

3. Install the disc brake assembly.

Tightening torque:

Mounting bolt: 120 N·m (12.2 kgf-m, 88.5 ft-lb)

Brake hose bracket: 33 N·m (3.4 kgf-m, 24.3 ft-lb)

4. Install the front wheels.

Tightening torque:

120 N·m (12.2 kgf-m, 88.5 ft-lb)

Inspection

1. DISC ROTOR RUNOUT CHECK1. Check the hub unit COMPL - front axle for free play and runout before the inspection of disc rotor runout limit. Front Hub Unit Bearing > INSPECTION2. Tighten the wheel n ...

General description

...

Other materials:

Inspection
1. Moving the front tire up and down by hand, check there is no play in bearing, and check the wheel rotates smoothly.CAUTION:If there is any fault in the bearing, replace the hub unit COMPL.2. Inspect axial play of the hub unit bearing.(1) Remove the tire and disc rotor.(2) Inspect the lean of axis ...