Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / Noise suppressor / Installation

1. Install the noise suppressor assembly.

Tightening torque:

12±3 N·m (1.2±0.3 kgf-m, 8.9±2.2 ft-lb)

2. Install the trim panel - rear pillar UPR. (Sedan model) Rear Quarter Trim > INSTALLATION

3. Install the trim panel - rear gate. (OUTBACK model) Rear Gate Trim > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Removal

1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - rear pillar UPR. Rear Quarter Trim > RE ...

Power amplifier

...

Other materials:

Dtc p014c a/f / o2 sensor slow response - rich to lean bank 1 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK EXHAUST SYSTEM.NOTE:Check the foll ...