Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / Power amplifier / Installation

1. Install the power amplifier - assembly.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

2. Connect the ground terminal to battery sensor. NOTE

Removal

NOTE:Remove the power amplifier assembly after sliding the passenger’s seat back and forth as necessary.1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the power amplifier ...

Rear accessory power supply socket

...

Other materials:

Adjustment
1. Disconnect the ground terminal from battery sensor. NOTE2. Release the shift lock using a screwdriver to shift the select lever to the “N” range.3. Lift up the vehicle.4. Remove the center exhaust pipe. Center Exhaust Pipe > REMOVAL5. Loosen the two bolts holding the inhibitor switc ...