Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

CAUTION:

If the sealing cover - front door gets broken, replace it with a new part.

Apply a uniform bead of butyl tape.

Attach the sealing cover - front door, keeping it from becoming wrinkled.

Breaks in the bead will allow water leakage and contamination.

1. Install the sealing cover - front door.

(1) Forcefully push the butyl tape portion to prevent any floating on surface.

(2) When replacing the sealing cover, use the butyl tape.

Butyl tape:

3M Butyl Tape 8626 or equivalent

2. Install the trim panel - front door. Door Trim > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Inspection
If the sealing cover - front door is broken, replace it with a new part. ...

General description
...

Other materials:

Inspection
1. Park the vehicle at a level place where there are enough area at the rear of the vehicle.2. Attach the tape as the target point for standard at the floor rearward of the vehicle as shown in the figure below.NOTE:Standard tape width is about 30 — 50 mm (1.18 — 1.97 in) and brilliant color shal ...

© 2017-2024 Copyright www.sulegacy.com