Subaru Legacy BN/BS (2015-2019) Service Manual: Front sealing cover

Assembly

1. Install the hinge COMPL - front hood.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Install the stay assembly - front hood.Tightening torque:20 N·m (2.0 kgf-m, 14.8 ft-lb)3. Insta ...

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the sealing ...

Other materials:

Installation
1. Replace the rear differential side oil seal. Rear Differential Side Oil Seal > REPLACEMENTNOTE:After pulling out the drive shaft assembly, be sure to replace with a new oil seal.2. Insert the drive shaft assembly into the rear hub spline, and pull it into the specified position.CAUTION:• B ...