Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Exterior interior trim / Instrument panel lower cover / Installation

1. Install the cover assembly - instrument panel LWR driver.

2. Install the data link connector, and install the under cover assembly - driver.

3. Install the cover - instrument panel side LH.

4. Connect the ground terminal to battery sensor. NOTE

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the clips, and remove the cover - instrument panel side LH.NOTE:Remove ...

Lower inner trim

...

Other materials:

Dtc p014c a/f / o2 sensor slow response - rich to lean bank 1 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK EXHAUST SYSTEM.NOTE:Check the foll ...