Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Exterior interior trim / Sun visor / Installation

1. Install the hook - sun visor.

2. Install the sun visor assembly.

CAUTION:

Do not rotate the sun visor assembly when it is temporarily installed. The claw for temporary installation may be damaged.

Tightening torque:

2 N·m (0.2 kgf-m, 1.5 ft-lb)

Removal

1. Remove the sun visor assembly.(1) Detach the cover, and remove the screws.(2) Disconnect the connector, and remove the sun visor assembly.2. Remove the hook - sun visor.(1) Press both sides using a ...

Trunk lid garnish

...

Other materials:

Inspection
1. Moving the rear tire up and down by hand, check there is no backlash in bearing, and check the wheel rotates smoothly.CAUTION:If there is any fault in the bearing, replace the hub unit COMPL - rear axle.2. Inspect axial play of the hub unit bearing.(1) Remove the tire and disc rotor.(2) Inspect t ...