Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / In-vehicle sensor (auto a c model) / Installation

1. Install the in-vehicle sensor.

2. Install the cover assembly - instrument panel LWR driver.

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Set the vehicle to the following conditions.ItemConditionIgnition switchONAC switchONTemperature adjustment dialHI (MAX HOT)Air flow control switchDEFFan switchHI (MAX)2. Check the suction port (a) ...

Mode door actuator

...

Other materials:

Dtc p2770 torque converter clutch circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:No lock-up occurs.WIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK HARNESS.1) Turn the ignition switch to OFF.2) Disconnect the TCM and transmission connectors.3) Measure the resistance ...