Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Instrumentation driver info / Warning box / Installation

CAUTION:

• Make sure the electrical connector is connected securely.

• Make sure that each indicator operates normally.

1. Install the warning box.

2. Install the overhead console. (Models without EyeSight)

3. Install the stereo camera cover assembly. (Models with EyeSight) Stereo Camera > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Removal

1. MODELS WITHOUT EyeSight1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the overhead console.(1) Release the clips and claws.(2) Disconnect the connector, and remove the overhe ...

Keyless access with push button start system (diagnostics)

...

Other materials:

Electrical specification
Terminal No.ContentMeasured value and measuring conditionsRemarks1 — — — 2 — — — 3 — — — 4Ignition power supply10 — 13 V (when the ignition switch is ON) — 5GND0 V (always) — 6Battery power supply10 — 13 V (always)Without push button start system7 — — — 8 — ...