Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Wiper and washer systems / Wiper blade / Installation

Install each part in the reverse order of removal.

CAUTION:

Make sure the locking clip is secured.

NOTE:

Since the arm assembly - windshield wiper LH and RH can interfere with each other, install the passenger’s side first.

Assembly

1. FRONT1. Insert the rubber assembly - windshield wiper onto the blade - windshield wiper so that the stopper is in the position shown in the figure.2. Make sure the rubber assembly - windshield wipe ...

Inspection

1. Check and clean the rubber assembly - wiper.CAUTION:• Do not use organic solvent-based cleaner when cleaning rubber parts in order to avoid rubber part deterioration.• Do not continue t ...

Other materials:

Removal
1. MAIN SWITCH1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the panel - power window main switch.CAUTION:Be careful not to damage the trim panel - front door ...