1. Attach protective tape on the handle and the edge surface of the sunshade assembly, and install the sunshade assembly. 2. Install the drain holder. 3. Install the rail assembly - sunroof. Sunroof Assembly > INSTALLATION 4. Install the trim panel - roof assembly. Roof Trim > INSTALLATION 5. Install the lid assembly - sunroof. Glass Lid > INSTALLATION 6. Connect the ground terminal to battery sensor. NOTE |
Inspection
SpecificationsOutback
Undo the clips. For the method to undo
the clips, refer to "Type C clips" F11-6.
Remove the cover.
Remove the upper and lower screws.
Slide the rear combination light assembly
straight rearward and remove it
from the vehicle.
1) Rear turn signal light
2) Rear ...