Subaru Legacy BN/BS (2015-2019) Service Manual: Manifold absolute pressure sensor

Installation

1. Install the main relay to the main fuse box.2. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Other materials:

Caution
• Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from battery. When replacing the electrical parts provided with memory functions that store contents specified by a customer, record the memory contents before disconnecting the battery ground cable.& ...