Subaru Legacy BN/BS (2015-2019) Service Manual: Oil pan and strainer

Installation

1. Install the oil level switch, and install the clip (A) to the oil pan upper.NOTE:• Use new O-rings.• Apply a coat of engine oil to the O-rings.Tightening torque:6.4 N·m (0.7 kgf- ...

Removal

1. OIL PAN AND STRAINER1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Drain the engine oil. Engine Oil > REPLACEMENT4. Remove the front exhaust pipe. Front Exh ...

Other materials:

Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Connect the harness connector.2. Install the primary speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:7 ...