Subaru Legacy BN/BS (2015-2019) Owners Manual: Outside mirrors

Subaru Legacy BN/BS (2015-2019) Owners Manual / Instruments and controls / Mirrors / Outside mirrors

Convex mirror (passenger side)

WARNING Objects look smaller in a convex mirror and farther away than when viewed in a flat mirror. Do not use the convex mirror to judge the distance of vehicles behind you when changing lanes. Use the inside mirror (or glance backwards) to determine the actual size and distance of objects that you view in convex mirror.

Remote control mirror switch

Remote control mirror switch

: Select side to adjust
: Direction control

The remote control mirrors operate only when the ignition switch is in the "ON" or "ACC" position.

Turn the control switch to the side that you want to adjust. "L" is for the left mirror, "R" is for the right mirror.
Move the control switch in the direction you want to move the mirror.
Return the control switch to the neutral position to prevent unintentional operation.

The mirrors can also be adjusted manually.

Auto-dimming mirror/compass with HomeLink (models with EyeSight system)

1) Display 2) HomeLink buttons 3) Switch During nighttime driving, the auto-dimming feature senses distracting glare from vehicle headlights behind you and automatically dims to eliminate th ...

Tilt/telescopic steering wheel

WARNING Do not adjust the steering wheel tilt/telescopic position while driving. This may cause loss of vehicle control and result in personal injury. If the ...

Other materials:

Assembly
1. Install the CVTF filter.NOTE:• Use a new CVTF filter.• Apply CVTF to the CVTF filter.• Make sure that the CVTF filter does not protrude from the transmission case.2. Using the ST, install the oil seal.ST 18657AA000INSTALLER3. Using ST1 and ST2, install the ball bearing on the ...