Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation
1. SUBARU SELECT MONITOR (NORMAL MODE) NOTE: • For detailed operation procedures, refer to “Application help”. • For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC) 2. GENERAL SCAN TOOL Refer to the data denoting emission-related powertrain DTC. For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC) NOTE: Refer to the general scan tool manufacturer’s operation manual to access powertrain DTC (MODE $03). |
Inspection mode procedure
Perform the diagnosis shown in the following DTC table.When performing the diagnosis not listed in “List of Diagnostic Trouble Code (DTC)”, refer to the item on the drive cycle. Drive Cyc ...
Other materials:
Procedure
NOTE:• During variator chain break-in, VDC warning light illuminate because of the difference between the vehicle speed value and G sensor value. This is not a malfunction. If the warning light illuminates, clear the VDC memory after the variator chain break-in is finished. Clear Memory Mode& ...
