Subaru Legacy BN/BS (2015-2019) Service Manual: Rear stabilizer

Disassembly

1. Using a coil spring compressor, compress the coil spring.2. Using a hexagon wrench to prevent the shock absorber piston rod from turning, remove the self-locking nut with ST.CAUTION:When installing ...

Removal

1. Lift up the vehicle, and then remove the rear wheels.2. Remove the rear stabilizer.(1) Remove the nut and disconnect the right and left stabilizer link assemblies.(2) Detach the right and left clam ...

Other materials:

Installation
1. SEDAN MODEL1. Install the rearview camera assembly.2. Install the garnish - trunk.Tightening torque:4.5 N·m (0.5 kgf-m, 3.3 ft-lb)3. Install the trim panel - trunk lid.4. Connect the ground terminal to battery sensor. NOTE5. Confirm the marker position. Rearview Camera System > INSPECTIO ...