Subaru Legacy BN/BS (2015-2019) Service Manual: Reduction drive gear

Installation

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Connect the harness connector.2. Install the prim ...

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the air breather hose. Air Breather Hose > REMOVAL3. Remove the control valve body. Control Valve Body > REMO ...

Other materials:

Installation
CAUTION:• Do not start the engine before charging refrigerant.• If the engine is started with no refrigerant charge, replace the compressor assembly.• Replace the gasket and O-rings with new parts, and then apply compressor oil.1. Install the expansion valve - cooling.Tightening to ...