Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Reverse brake assembly

...

Assembly

1. Apply CVTF to the seal of reverse brake piston and install it to intermediate case.2. Install the return spring.3. Set the spring retainer and snap ring.(A)Snap ring(B)Spring retainer4. Set the ST1 ...

Other materials:

Removal
1. Release the fuel pressure. Fuel > PROCEDURE2. Disconnect the ground terminal from battery sensor. NOTE3. Open the fuel filler lid and remove the fuel filler cap.NOTE:This operation is required to release the inner pressure of the fuel tank.4. When removing the RH side, also perform the followin ...