Subaru Legacy BN/BS (2015-2019) Service Manual: Specification
1. CONDITIONS FOR COMPLETION OF VDC SEQUENCE CONTROL When the following conditions develop, the VDC sequence control stops and VDC operation is returned to the normal control mode. • When the speed of at least one wheel reaches 10 km/h (6.2 MPH). • After completion of VDC sequence control. • When a malfunction is detected. |
Operation
1. While the VDC sequence control is performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve is operated.2. VDC s ...
Other materials:
Installation
1. SEDAN MODELCAUTION:Make sure that there is a gasket attached on the clip of the garnish assembly. If a gasket is not attached, water leakage may occur.Install the side garnish assembly.2. OUTBACK MODELCAUTION:Make sure that there is a gasket attached on the clip of the garnish assembly. If a gask ...
© 2017-2026 Copyright www.sulegacy.com
