Subaru Legacy BN/BS (2015-2019) Service Manual: Thermostat

Installation

1. Install the bolts securing the reservoir tank to the radiator fan shroud.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Insert the over flow hose (A) connected to the radiator filler nec ...

Removal

1. ENGINE SIDE1. Disconnect the ground terminal from battery sensor. NOTE2. Drain engine coolant. Engine Coolant > REPLACEMENT3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL4. Discon ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle, and then remove the rear wheels.3. Remove the nut - axle.CAUTION:Do not loosen the nut - axle while the rear axle is loaded. Doing so may damage the hub unit COMPL.(1) Lift the crimped section of the nut - axle.(2) R ...