Subaru Legacy BN/BS (2015-2019) Owners Manual: Tire inspection

Subaru Legacy BN/BS (2015-2019) Owners Manual / Maintenance and service / Tires and wheels / Tire inspection

Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear.

Contact your SUBARU dealer immediately if you find any problem.

NOTE

When the wheels and tires strike curbs or are subjected to harsh treatment as when the vehicle is driven on a rough surface, they can suffer damage that cannot be seen with the naked eye.
This type of damage does not become evident until time has passed. Try not to drive over curbs, potholes or on other rough surfaces. If doing so is unavoidable, keep the vehicle's speed down to a walking pace or less, and approach the curbs as squarely as possible. Also, make sure the tires are not pressed against the curb when you park the vehicle.
If you feel unusual vibration while driving or find it difficult to steer the vehicle in a straight line, one of the tires and/or wheels may be damaged.
Drive slowly to the nearest authorized SUBARU dealer and have the vehicle inspected.

Tire pressure monitoring system (TPMS) (if equipped)

The tire pressure monitoring system provides the driver with a warning message by sending a signal from a sensor that is installed in each wheel when tire pressure is severely low. The tire pressu ...

Tire pressures and wear

Maintaining the correct tire pressures helps to maximize the tires' service lives and is essential for good running performance. Check and, if necessary, adjust the pressure of each tire (includ ...

Other materials:

Assembly
1. Using the ST, install the parking gear to transfer reduction drive gear.ST 398177700INSTALLER2. Install the snap ring to transfer reduction drive gear.3. Using the ST, install the transfer reduction drive gear to transfer reduction drive gear shaft.ST 499277100BUSHING 1-2 INSTALLER4. Using ...