Subaru Legacy BN/BS (2015-2019) Owners Manual: To temporarily cancel the cruise control

Subaru Legacy BN/BS (2015-2019) Owners Manual / Starting and operating / Cruise control / To temporarily cancel the cruise control

The cruise control can be temporarily canceled in the following ways.

To temporarily cancel the cruise control

Press the "CANCEL" button.
Press the X-mode switch to activate the X-mode (models with X-mode).
Depress the brake pedal.
Depress the clutch pedal (MT models).

WARNING For CVT models, do not place the select lever in the "N" position while driving. If the select lever is shifted into the "N" position, cruise control can be canceled but the engine brake will no longer work. This could result in an accident.

The cruise control set indicator in the combination meter disappears when the cruise control is canceled.

To temporarily cancel the cruise control

To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (30 km/h) or more, press the "RES/SET" switch to the "RES" side to return to the original cruising speed automatically.

The cruise control set indicator in the combination meter will automatically appear at this time.

To set cruise control

Cruise control main button Press the cruise control main button. Cruise control indicator The cruise control indicator on the combination meter will appear. Depress the accelerator ...

To turn off the cruise control

There are two ways to turn off the cruise control: Press the cruise control main button again. Turn the ignition switch to the "ACC" or "LOCK"/"OFF" position (but only when the ...

Other materials:

Removal
1. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the air intake duct.• H4 model: Air Intake Duct > REMOVAL• H6 model: Air Intake Duct > REMOVAL4. Remove the ...