Subaru Legacy BN/BS (2015-2019) Service Manual: Trunk room trim

Installation

CAUTION:Make sure that there is a gasket attached on the clip of the garnish assembly. If a gasket is not attached, water leakage may occur.1. Install the garnish - trunk.Tightening torque:4.5 N&middo ...

Removal

1. Remove the clips, and remove the trim panel - trunk lid.2. Pull the release lever in the trunk room, and then tilt the backrest forward.3. Remove the mat - trunk.4. Remove the trim panel - trunk re ...

Other materials:

Installation
1. Set the range select lever to the “N” range.2. Install the parking pawl shaft, return spring and parking pawl.NOTE:Make sure that the end of return spring sticks out of parking pawl as shown in (a). Make sure that the other end contacts the rib of intermediate case as shown in (b).(A) ...