Subaru Legacy BN/BS (2015-2019) Service Manual: Turbine speed sensor

Installation

1. TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER1. Attach the rear cushion rubber to the transmission.Tightening torque:40 N·m (4.1 kgf-m, 29.5 ft-lb)2. Install the crossmember.Tighteni ...

Removal

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.1. Disconnect the ground terminal from battery senso ...

Other materials:

Installation
1. Insert the ST into the clutch disc and insert the ST end into the pilot bearing.NOTE:When installing the clutch disc, be careful to attach in the correct direction.ST 499747100CLUTCH DISC GUIDE(A)Flywheel side2. Install the clutch cover and tighten the bolts to specified torque.NOTE:• Wh ...