Subaru Legacy BN/BS (2015-2019) Service Manual: Ambient sensor

Installation

CAUTION:After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.1. Install the switch - hazard. (Center g ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clips, and turn over the mud guard - front.3. Disconnect the connector and remove the ambient sensor. ...

Other materials:

Installation
1. Install the front differential assembly to the converter case.NOTE:Be careful not to damage the inside of the case (especially the mounting surface of the differential side retainers).2. Install the bearing outer race.3. Temporarily install the differential side retainers using ST.ST 18658AA02 ...