Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Ambient sensor / Installation

1. Install the ambient sensor.

2. Install the mud guard - front.

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Visually check the ambient sensor for dirt or damage, and clean or replace as necessary.2. Measure the resistance between ambient sensor terminals.CAUTION:During inspection, be careful not to touch ...

Blower motor

...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the under cover. Front Under Cover > REMOVAL4. Disconnect the front oxygen (A/F) sensor connector, and remove the clip holding the front oxygen (A/F) sensor harness.(A)Front oxygen (A/F) sensor connector(B) ...