Subaru Legacy BN/BS (2015-2019) Service Manual: Blower motor

Installation

1. Install the ambient sensor.2. Install the mud guard - front.3. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Release the hook, and remove the under cover assembly - passenger.3. Remove the blower motor.(1) Disconnect the connector.(2) Remove the ...

Other materials:

Removal
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover ...