Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h4do) / Center exhaust pipe / Assembly

Install each cover to the center exhaust pipe.

Tightening torque:

13 N·m (1.3 kgf-m, 9.6 ft-lb)

Removal

1. Lift up the vehicle.2. Remove the bolts, springs, and nuts securing the rear exhaust pipe to the center exhaust pipe.3. Remove the bolt which holds center exhaust pipe to hanger bracket.4. Remove t ...

Installation

1. Temporarily tighten the nuts which secure the center exhaust pipe to the front exhaust pipe.NOTE:Use a new gasket.2. Install the bolts, springs, and nuts which secure the rear exhaust pipe to the c ...

Other materials:

Dtc p2195 a/f /o2 sensor signal biased/stuck lean bank 1 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE T ...