Subaru Legacy BN/BS (2015-2019) Service Manual: Camshaft position sensor

Throttle position sensor specification

Throttle body is a non-disassembled part, so do not remove the throttle position sensor from throttle body.Refer to “Throttle Body” for removal and installation procedure. Throttle Body > ...

Removal

1. INTAKE SIDE1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving ...

Other materials:

Installation
1. Install the harness clip to the transmission assembly.2. Insert the transmission harness bushing into the round hole on the transmission case and install the bolt.NOTE:• Use new O-rings.• Do not impact or bend the transmission harness because it has the oil temperature sensor inside.T ...