Subaru Legacy BN/BS (2015-2019) Service Manual: Clear memory mode operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System Check». 4. On «Select System» display, select «Power Steering». 5. On «Select Function» display, select «DTC». 6. On «DTC» display, select «Clear Memory». NOTE: • Before performing memory clear, check the current data, and if there are any data of DTC, trouble status information, overheating protection intervention history, IGN count from overheating protection and assist limit history, save them. • For detailed operation procedures, refer to “Application help”. |
Check list for interview check
Check the following items regarding condition of the vehicle.1. TROUBLE STATUSPhenomenon of the vehicle Steering is heavy Steering is not smooth Steering is unstable (wondering) Steering does not retu ...
Electrical component location location
(1)Steering gearbox (including power steering control module)(2)STEERING warning light ...
Other materials:
Installation
1. MAIN SWITCHCAUTION:• After installing the switch - power window main, always perform the initial setting.Failure to do so may cause the improper activation of auto-reverse operation for pinching hazard prevention.• Use protective paper to avoid damage to the trim panel.1. Install the ...
