Subaru Legacy BN/BS (2015-2019) Service Manual: Data link connector note

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Data link connector note

This connector is used for Subaru Select Monitor.

CAUTION:

Do not connect any scan tools other than Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.

Terminal No.	Contents	Terminal No.	Contents
1	Blank	9	Blank
2	Blank	10	Blank
3	Blank	11	Blank
4	Ground	12	Blank
5	Ground	13	Blank
6	CAN communication (Hi)	14	CAN communication (Lo)
7	Blank	15	Blank
8	Blank	16	Power supply

Clear memory mode operation

1. SUBARU SELECT MONITOR1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, se ...

Electrical component location location

1. CONTROL MODULE(1)Engine control module (ECM)(3)Malfunction indicator light(4)Delivery (test) mode fuse(2)Data link connector 2. SENSOR(1)Tumble generator valve actuators (with built-in opening a ...

Other materials:

Dtc p2757 torque converter clutch pressure control solenoid control circuit performance/stuck off
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:No lock-up occurs.1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK DTC.Read the DTC using Subaru Select Monitor.Besides DTC P2757, is any ...