Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c2514 torque sensor power supply

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc c2514 torque sensor power supply

DTC DETECTING CONDITION:

When torque sensor power supply voltage failure is detected after the ignition switch is ON.

NOTE:

Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2511 TORQUE SENSOR MAIN

Dtc c2521 motor malfunction

DTC DETECTING CONDITION:• When motor driving element malfunction is detected after assist starts with 500 rpm engine speed reception.• When motor current failure is detected after assist s ...

Dtc c2513 torque sensor much tolerance

DTC DETECTING CONDITION:When torque sensor main/sub output voltage failure is detected after the ignition switch is ON.NOTE:Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure ...

Other materials:

Basic diagnostic procedure procedure
CAUTION:Remove foreign matter (dust, water, oil, etc.) from the TPMS & keyless entry CM connector or TPMS CM connector during removal and installation.NOTE:To check harness for open or short circuits, shake the suspected trouble spot or connector.STEPCHECKYESNO1.CHECK PRE-INSPECTION.1) Check with th ...