Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c2521 motor malfunction
DTC DETECTING CONDITION: • When motor driving element malfunction is detected after assist starts with 500 rpm engine speed reception. • When motor current failure is detected after assist starts with 500 rpm engine speed reception. • When motor voltage failure is detected after assist starts with 500 rpm engine speed reception. TROUBLE SYMPTOM: • The steering wheel operation feels heavy. • STEERING warning light illuminates. NOTE: When this code is displayed, replace the steering gearbox with a new part. Electric Power Steering Gearbox |
Dtc c2522 resolver sensor
DTC DETECTING CONDITION:When resolver signal output voltage failure is detected after assist starts with 500 rpm engine speed reception.TROUBLE SYMPTOM:• The steering wheel operation feels heavy ...
Dtc c2514 torque sensor power supply
DTC DETECTING CONDITION:When torque sensor power supply voltage failure is detected after the ignition switch is ON.NOTE:Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. ...
Other materials:
Installation
CAUTION:When the ECM of model with immobilizer has been replaced, be sure to perform the registration of immobilizer system. (Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER”.)NOTE:When replacing the ECM, be careful not to use the ECM of wrong specification to avoid any damage on the f ...
