Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c2522 resolver sensor

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc c2522 resolver sensor

DTC DETECTING CONDITION:

When resolver signal output voltage failure is detected after assist starts with 500 rpm engine speed reception.

TROUBLE SYMPTOM:

• The steering wheel operation feels heavy.

• STEERING warning light illuminates.

NOTE:

When this code is displayed, replace the steering gearbox with a new part. Electric Power Steering Gearbox

Dtc c2531 control module cpu

DTC DETECTING CONDITION:When microcomputer malfunction is detected after the ignition switch is ON.TROUBLE SYMPTOM:• The steering wheel operation feels heavy.• STEERING warning light illum ...

Dtc c2521 motor malfunction

DTC DETECTING CONDITION:• When motor driving element malfunction is detected after assist starts with 500 rpm engine speed reception.• When motor current failure is detected after assist s ...

Other materials:

Dtc u0420 invalid data received from power steering control module
DTC DETECTING CONDITION:Defective data was transmitted from EPS CM.TROUBLE SYMPTOM:Cooperation control with EPS CM does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure with Diagnostic ...