NOTE: Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure |
Dtc u1120 lost communication with autostart stop control module
Dtc u0416 invalid data received from vehicle dynamics control moduleDisassembly
1. Flatten the tab of the lock nut.2. Using ST1, ST2 and ST3, fix at the spline portion of drive pinion shaft to remove the lock nut.ST1 499787500ADAPTERST2 499787700WRENCHST3 498937110HOLDER3. Remove the drive pinion shaft from the drive pinion retainer.4. Using the round bar with diameter ...