Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u1120 lost communication with autostart stop control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u1120 lost communication with autostart stop control module

NOTE:

Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure

Dtc u1235 lost communication with eyesight

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure ...

Dtc u0073 control module communication bus off

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure ...

Other materials:

Inspection
1. ARMATURE1. Check the commutator for signs of seizure or stepped wear caused by roughness of the surface. If there is light wear, use sandpaper to repair.2. Check for runout on the commutator. If excessive, replace the armature.Commutator runout:Standard0.05 mm (0.0020 in)Limit0.10 mm (0.0039 in)( ...