Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0402 invalid data received from tcm

Subaru Legacy BN/BS (2015-2019) Service Manual / Telematics system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0402 invalid data received from tcm

This is detected when CAN data from TCM is abnormal.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0416 invalid data received from vehicle dynamics control module

This is detected when CAN data from VDC is abnormal.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc u0401 invalid data received from ecm/pcm "a"

Detected when CAN data from ECM is abnormal.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the bumper face - front. Front Bumper > REMOVAL3. Remove the resistor assembly - daytime running light.CAUTION:The resistor may become hot. Be careful not to burn yourself when removing it.(1) Disconnect the connector.(2) Remove ...