Subaru Legacy BN/BS (2015-2019) Service Manual: Forward clutch assembly

Inspection

Check for leakage of CVTF from the joint section of transmission and propeller shaft. If a leak is found, inspect the propeller shaft and replace the oil seal. ...

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the air breather hose. Air Breather Hose > REMOVAL3. Remove the control valve body. Control Valve Body > REMO ...

Other materials:

Installation
1. Install the engine coolant temperature sensor, and connect the connector to the engine coolant temperature sensor.NOTE:Use a new gasket.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)2. Connect the ground terminal to battery sensor. NOTE3. Fill engine coolant. Engine Coolant > REPLACEME ...