Subaru Legacy BN/BS (2015-2019) Service Manual: Front regulator and motor assembly

Installation

1. Install the glass - front door partition.2. Install the running channel - front door and the sash assembly - partition.CAUTION:Check that the running channel - front door is securely fixed to the p ...

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the sealing ...

Other materials:

Installation
1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH1. Install the back-up light switch & neutral position switch with the harness.NOTE:Use a new gasket.Tightening torque:32.3 N·m (3.3 kgf-m, 23.8 ft-lb)(A)Neutral position switch(B)Back-up light switch2. Lower the vehicle.3. Connect the connectors of ...