Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Glass windows mirrors / Front regulator and motor assembly / Installation

1. Install the regulator and motor assembly - front.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

2. Install the glass assembly - front door. Front Door Glass > INSTALLATION

3. Install the sealing cover - front door.

4. Install the trim panel - front door. Door Trim > INSTALLATION

5. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check the motor operation when battery voltage is applied between the connector terminals.• LH sideTerminal No.Inspection conditionsStandard6 (+) — 3 (−)Apply battery voltage between ...

Other materials:

Malfunction indicator light does not go off
TROUBLE SYMPTOM:Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.STEPCHECKYESNO1.CHECK DTC.Is DTC of engine or LAN system displayed- Read Diagnostic Trouble Code (DTC) > OPERATIONCheck the appropriate DTC ...

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Inspection

General description

Other materials: